If you’re renting a home or apartment, you may not have the luxury of installing a permanent water heater. But that doesn’t mean you can’t have good-tasting, hot water. In fact, most rental properties come equipped with a “service” water heater that heats water only when someone is using it. This is often referred to as a “temporary” water heater.If you have a service water heater, you’ll want to make sure it’s in good working order and ready to provide hot water when you need it. Otherwise, you might end up with lukewarm water or worse if the temporary water heater breaks down and stops working. To learn how to install a commercial water heater from scratch, read on...
What is a commercial water heater?
A commercial water heater is a large, high-capacity tank that stores water and is used to provide hot water for commercial purposes such as cooking, cleaning, and bathing. If you’re renting a home or apartment, you’ll likely have a service water heater that heats water only when someone is using it. These smaller water heaters are typically about 5 gallons and are great for smaller households or rental properties. A commercial water heater is much larger and can store a bucket or more of water. They are usually installed in a large commercial building such as a restaurant, hotel, or nursing home.
Things to Consider Before Installing a Commercial Water Heater
Before installing a commercial water heater, there are a few things you should consider. First, you’ll need to determine how many people will be using the water. If you’re going to be using the water for commercial purposes, you’ll want to store enough water to last for the entire day. If you’re only going to be using the water for cooking and bathing, you can probably store enough water for a few hours.You’ll also need to decide which type of tank you want to use. There are several different types of commercial water heaters you can choose from. Here are a few things to keep in mind when shopping for one:
Water Temperature: The most common type of commercial water heater is the atmospheric tank, which heats water to a relatively low temperature of about 120 degrees. Most other types of commercial water heaters can provide hotter water, although they are more expensive.
Efficiency: Many commercial water heaters can be quite expensive. Make sure you are choosing one that is highly efficient to save money on water and energy costs over the long term.
Thermal Storage: Some commercial water heaters include a thermal storage tank that can store hot water and release it later at a lower temperature. This is ideal for large buildings such as hotels and nursing homes. It allows the building to provide hot water to guests or residents throughout the day.
Installation of a commercial water heater
The installation process for a commercial water heater is similar to a residential water heater. You’ll want to make sure the location of the water heater is stable and level, and that it’s free from leaks. You’ll also want to make sure the water heater is connected to the source of water (i.e. the water main), and that it’s properly sized for the number of people it’s supposed to serve.If you’re renting a home or apartment, it may be necessary to install a water tank inside the home. Make sure you have a professional help you with the installation, as it’s not a DIY job if you don’t know what you’re doing.
Final words
A commercial water heater is a big investment, so make sure you’re picking a high-quality model that will last for years. You may want to hire a professional to install it for you if you’re renting a home or apartment. Once it’s installed, you’ll want to keep an eye on the water level to make sure you don’t run out of hot water.And that’s it! Now you know how to install a commercial water heater!